Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Buffalo, MN

Graffiti Removal in Buffalo, MN

Removing spray paint and marker from brick, concrete, stucco and stone, using removers matched to the surface. Typical cost $200-$800.

The secret to graffiti removal is using the right method, not the most pressure. In Buffalo, MN, we match the cleaner and pressure to the surface so it comes out clean without damage.

Method and pressure

Graffiti remover and pressure washCleaning method

Is it time for graffiti removal?

  • Spray paint or marker on walls, fences or signs
  • Ghost marks left from earlier removal

Where the grime comes from

  • Vandalism
  • Shadowing left by paint that soaked into porous masonry

What you can do yourself

  • Photograph it for your records or police report first
  • Don't paint over it with a color that won't match
  • Ask about anti-graffiti coatings for repeat targets

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Common mistakes to avoid

  • Driving paint deeper into porous masonry
  • Damaging the surface with the wrong solvent
  • Leaving a 'clean' patch that stands out

How we handle graffiti removal

  1. Identify the paint and the surface
  2. Test a remover on a small area
  3. Apply remover and let it dwell
  4. Rinse with pressure suited to the surface
  5. Treat shadowing or apply a protective coating

Typical graffiti removal prices

$200-$800Typical range for a typical wall or tag area
1-3 hoursTypical time on site
As needed; fast removal discourages repeat taggingRecommended frequency

What moves the price:

  • Area and number of buildings
  • Scheduling: early-morning, overnight or weekend work
  • Whether wash water has to be recovered under local stormwater rules
  • Frequency: recurring service is usually priced lower per visit

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Graffiti Removal in Buffalo, MN

Commercial properties in Minnesota usually get a big spring clean of sidewalks, entrances and parking areas to remove sand, salt and winter litter, and many schedule a second visit in the fall.

Crews serve all of Buffalo (ZIP code 55313), plus Maple Lake (7.3 mi), Montrose (7.6 mi), Rockford (9 mi) and Delano (9.9 mi). Call (555) 010-0000 for a free quote in Buffalo.

Graffiti Removal: frequently asked questions

How much does graffiti removal cost in Buffalo, MN?

Graffiti Removal typically costs $200-$800 for a typical wall or tag area, and usually takes 1-3 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for graffiti removal?

Graffiti Removal is usually done with graffiti remover and pressure wash, with the pressure adjusted for each surface. Delicate surfaces nearby, such as siding, windows and plants, are protected or cleaned with lower pressure.

Is graffiti removal safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule graffiti removal?

As needed; fast removal discourages repeat tagging. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Buffalo, MN

Fence Cleaning for Cedar

Low-pressure wash. Cedar decks and fences turn silver-gray as the surface weathers.

Typical $200-$600

Oil Stain Removal for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $100-$300

Oil Stain Removal

Lifting oil, grease and fluid stains from driveways, garage floors and parking areas.

Typical $100-$300

Pressure Washing for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $150-$600

Driveway Cleaning for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $150-$400

Concrete Sealing for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $400-$1,200

Commercial Pressure Washing for EIFS (Synthetic Stucco)

Soft wash. EIFS looks like stucco but is a foam insulation board with a thin acrylic finish coat.

Typical $400-$2,000

Efflorescence Removal for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $200-$600

Rust Stain Removal for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $150-$500

Deck Cleaning for Pressure-Treated Wood

Low-pressure wash. Pressure-treated pine is the most common deck and fence wood.

Typical $250-$600

Soft Washing for Vinyl Siding

Soft wash. Vinyl is the most common siding in the U.S.

Typical $300-$800

Efflorescence Removal for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $200-$600

Ready for a cleaner home or business?

Get a free pressure washing quote in Buffalo, MN. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote